Home > Error Code > Error 0141 Western Digital

Error 0141 Western Digital

Contents

Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. It also may be due to a defective connection. Retest. Replace. navigate to this website

The cable is loose, broken, or not plugged in. It took much longer than usual to mount the hard disk, but strangely enough I was able to get at least partial access to the disk. Replace your cable and retest the drive. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. http://arstechnica.com/civis/viewtopic.php?t=1156653

Error 0141 Dell

Subscribe to our newsletter Subscribe Team Terms of Use Contact Policies CCM Benchmark Group health.ccm.net Articles & News Chart Forum Business Brands Tutorials Other sites Tom's Hardware,The authority on tech It is also possible to see this error on defective Western Digital drives. If the errors continue, replace the drive. There may be repairable media errors on a platter.

Replace Drive 211 2-9 Uncorr ECC Errors Error Correction Code (ECC) 2 through 9. Data request has timed out when writing to the drive. Drive Reliability Monitor. Dell Error Code 0141 Troubleshooting Replace the drive if the error repeats.

This may be an anomaly or a defect with the drive. Drive should be replaced. Replace the drive if the error repeats. https://community.wd.com/t/error-status-code-0141/14847 Re-Test Drive 17 Erase SSD Failure A write command during the test has failed.

Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Dell Error Code 0141 No Bootable Devices Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. It is also possible to see this error on defective Western Digital drives. Replace the drive.

  1. Data sent between the host computer and the drive has been corrupted.
  2. Re-Test Drive 105 BUSY GLITCH The drive did not properly respond to test commands.
  3. Replace Drive 217 2-9 SERVO Errors SERVO 2-9.
  4. Ten or more instances of track information could not be found.
  5. Replace Drive 587 Bad Sector The previous relocation of a sector has failed.
  6. You may need to rescan to ensure that the repairs were effective.

Dell Error 0141 Hard Drive

Please re-test the drive with Data Lifeguard. http://www.tomshardware.com/forum/258012-32-hard-drive-currepted Check cable and retest. Error 0141 Dell Drive should be replaced. Dell Error Code 0141 Hard Drive Create and use a new DLG Tools diskette.

Being a member gives you detailed monitoring of your requests. Test complete Defect Free 224 Errors not Repaired Errors found and have not been repaired. The drive has failed and must be replaced. Replace the drive if the error repeats. Dell Error Code 2000-0141

Replace the drive. There are too many errors detected on this drive to be repaired. Retest. http://dssoundware.com/error-code/error-0141-hard-drive.php An onboard defect counter has determined the drive has too many errors and should be replaced.

ECC is a hardware correction technique that corrects errors. Msg Error Code 2000-0141 http://www.hirensbootcd.net/ m 0 l Muthu_k 28 April 2010 15:59:42 manojgj said:get Hirens boot cd go to HDD tools & use any one of it repair tool provided by HDD manufactures like Last time I priced it out it was like $40 to order one.

Re-test Drive 142 TK-TK SEEK ERROR Error encountered during track-to-track seek.

Re-test Drive 159 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. The drive should now be defect free. I think this pretty much confirms that it's probably a connection problem, but I just can't reach the hard drive to confirm it. Dell Inspiron 1525 Error Code 0141 EDIT2: I can no longer access the hard disk in any way from within linux Edited by Mark.3unj800, 06 January 2012 - 05:19 AM.

It also may be due to a defective connection. At least ten ECC errors have been detected. Check cabling & retest. get redirected here Do you think I should let them try and trouble shoot over the phone before taking the slave drive route?

This may be due to a media or read/write error. Re-Test Drive 112 IRQ Timeout Interrupt ReQuest Interrupt signal not received. Or should I keep trudging on? Check cabling and retest.

This may be due to a defect. Forum SolvedDid my hard drive die? Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. The drive has to be replaced.

This may be an anomaly. Return to Top Data Lifeguard Tools 2.8 Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. Error code Several instances of information on data positioning and location could not be found. Retest the drive with Data Lifeguard.

Check cabling & retest. It had not frozen - it just was at a part where it said certain files couldn't be read and each one was taking awhile to go through. ECC is a hardware correction technique that corrects errors. The drive has not responded back in the time allotted.

Replace Drive 216 10+ IDNF Errors Identified Data Not Found (IDNF) 10+. No Errors 100 No Errors Found Successful operation. Drive should be replaced. It managed to boot up completley, but everything was extremely slow and sluggish.

Before posting on our computer help forum, you must register. Replace the drive. Re-Test Drive 104 Drive Not Ready The drive did not properly respond to test commands.